Consultation

UZIN Customer Service

Technical Support

Locations

UZIN in Ihrer Nähe

Consultation

UZIN Customer Service

Technical Support

Locations

UZIN in Ihrer Nähe

UZIN SC 970 Thermo

Low-Shrink Rapid Cement

UZIN SC 970 Thermo

Special binding agent for efficiently producing low-shrinkage, dimensionally stable screeds for interior use

Data sheet

Consumption calculator

  • Large-surface work without pre-determined breaking points, reduces costs/m² significantly
  • Strength class CT-C30-F5 with mixing ratio 1:6 allows for the most efficient solutions
  • Early heating and defined ready for covering; follow-up work is therefore possible after a short time

Applications

  • bonded screeds
  • screeds on separating layer
  • screeds on insulation (floating screeds)
  • heated screeds
  • high wear in residential and industrial areas with all types of floor coverings
  • as UZIN system component in rapid construction

Properties

  • Deformation-free and low-tension
  • Joint free large areas up to 200 m²
  • Heating after 3 days
  • Very easy to install
  • Defined ready for covering, even with unfavourable climate conditions
  • Waterproof
Packaging

Paper bag

Shelf life

min. 6 months

Mixing ratio binding agent/sand

1:6 parts by weight (binding agent:sand)

Amount of water required per 200 l mixture

13 - 15 litres (according to sand moisture content)

Water/cement value

0.5 - 0.6

Colour

grey

Consumption

2.6 kg per m² and per cm of thickness

Working temperature

+5 °C to 25 °C at floor level

Mixing time

2 - 3 minutes

Working time

90 - 120 minutes*

Set to traffic

after 16 hours*

Heat drying

3 days after installation*

Ready for covering

After 10 – 14 days*

 

*At >10 °C and max. 80 % relative humidity.

Item no. Packsize Shipping unit
7312625 kg
Pallet :
42

References

Rapid screed with kick

Record: Daycare centre with rapid screed from UZIN.

Uzin Utz AG

International

Please note. Depending on the country you choose you will be forwarded to the homepage of the subsidiary. You will find the responsible contact person on the imprint page.