Uzin Utz AG
UZIN. The floor belongs to you
UZIN NC 888 S

Feather Coat

UZIN NC 888 S

Rapid drying feather coat

Data sheet

Consumption calculator

  • Extremly rapid drying, immediatly continue of working
  • Really good surface finish, very little rework necessary

Areas of application

  • new or old cement smoothing compounds
  • existing substrates with well-bonded, waterproof residues of adhesive and smoothing compounds
  • dense, mineral substrates
  • large and small format tiling and natural stone
  • dry screed materials, chipboards and OSB boards
  • all standard construction screeds, concrete or other substrate types
  • also for use as a "low-slump repair mortar" on old adhesive residues and for smoothing out to a feather-edge
  • heavy wear in domestic and commercial locations
  • warm water underfloor heating systems
  • exposure to castor wheels in accordeance with DIN EN 12 529
  • as a system component in high-speed construction

Product benefits / properties

  • from a "feather-edge" up to 4 mm thickness
  • no primer requiered
  • extremly rapid drying
  • excellent surface finish
  • fine aggregate
  • bags are protected against damage
  • plastic drum is available for mixing powder
  • extended shelf life in orginal unopened drum
  • low chromate content

Quality seals and badges

  • EMICODE EC 1 R PLUS - Very low-emission
EC1_R_PLUS_GB
Packaging

bag or two bags in plastic drum

Pack size

4.5 kg or 2 x 4.5 kg

Shelf life

min. 9 months

Required water quantity

2.25 litres per 4.5 kg bag

Colour

grey

Working temperature

min. 10 °C on floor level

 

Working time

approx. 20 minutes*

 

 

Set to traffic

after approx. 10 minutes*

 

 

Ready to cover

after approx. 15 minutes*

 

*At 21 °C / 70 °F and 68% relative humidity at maximum thickness of 1 mm and well absornebtsubfloors. See also "Application" in the product data sheet.

Article No. Shipping unit
56118
Pallet:
24

Uzin Utz AG

Countries and languages

Please note. Depending on the country you choose you will be forwarded to the homepage of the subsidiary. You will find the responsible contact person on the imprint page.