Consultation

UZIN Customer Service

Technical Support

Locations

UZIN in Ihrer Nähe

Consultation

UZIN Customer Service

Technical Support

Locations

UZIN in Ihrer Nähe

UZIN EP 12

2-Component Epoxy Scratch-Coat

UZIN EP 12

Epoxy resin scratch-coat as a primer and smoother for mineral substrates

Data sheet

Consumption calculator

  • Allows fast preparation of rough, shot-blasted or ground substrates
  • As a scratch-coat, prevents the rise of air-bubbles from the subfloor, therefore produces the highest surface quality for subsequent seal-coats

Applications

  • for filling or smoothing Prior to application of sealers or coatings
  • can also be used as a surface sealer and epoxy levelling compound
  • for interior use

Properties

  • Heavy duty use
  • Good filling consistency
  • Resistant against impact, shock, and wear
  • Chemical-resistant

288 KB /  PDF

332 KB /  PDF

Packaging

Metal combi-can

Colour

light grey

Shelf life

min. 24 months

Working temperature

min. 10 °C do not process below 10 °C at floor level, product will not set

Mixing ratio

A : B = 8.5 : 1.5 weight parts

Spec. Weight (A+B)

1.09 kg/l

Pot life

approx. 20 minutes*

Consumption**

approx. 500 - 2300 g/m²

Dust dry

after 8 - 10 hours*

Ready for foot traffic

after 12 - 16 hours*

Ready to be worked on

after 12 - 16 hours*

Apply the next coat within 24 hours

Final strength

after 5 - 7 days*

 

* At 20 °C and 65 % relative humidity.

** Reference values that cannot be used for binding factors, since consumption depends heavily on the nature of the substrate.

Item no. Packsize Shipping unit
3333310 kg
Pallet :
30

Uzin Utz AG

International

Please note. Depending on the country you choose you will be forwarded to the homepage of the subsidiary. You will find the responsible contact person on the imprint page.