RENOPLAN SYSTEM 6

How can floor covering be bonded quickly and easily to existing wearing surfaces?

With Sigan 2.

Tearing out existing flooring is elaborate, expensive and accompanied by inconveniences as well as unproductive downtimes. Sigan 2 offers a quick and reliable solution and what's more, it can be removed without residues even after years of use. New PVC, CV, rubber and textile floor coverings can be installed quickly and cleanly onto existing resilient and ceramic floor coverings utilising the switchTec adhesive technology from UZIN.

<p>Step 1: Use clean water to remove dust and dirt etc. Then wait until the surface is dry. Next perform a trial to check whether Sigan 2 adheres securely to the existing floor covering.</p>

Step 1: Use clean water to remove dust and dirt etc. Then wait until the surface is dry. Next...

<p>Step 2: Apply the Sigan 2 Tape along walls, doors and protrusions. This provides increased adhesive strength around the periphery.</p>

Step 2: Apply the Sigan 2 Tape along walls, doors and protrusions. This provides increased adhesive...

<p>Step 3: Install Sigan 2 in the running or working direction of the new floor covering.</p>

Step 3: Install Sigan 2 in the running or working direction of the new floor covering.

<p>Step 4: As an alternative, overlap the Sigan 2 sheets and cut back to the joint.</p>

Step 4: As an alternative, overlap the Sigan 2 sheets and cut back to the joint.

<p>Step 5: Another option is the installation of Sigan 2 using the 2-man method.</p>

Step 5: Another option is the installation of Sigan 2 using the 2-man method.

<p>Step 6: Fit the acclimatised floor covering and then fold back a half.</p>

Step 6: Fit the acclimatised floor covering and then fold back a half.

<p>Step 7: Pull the protective paper away from the Sigan 2. Cut the protective paper leaving a 10 cm remnant and fold under the floor covering to form a flap.</p>

Step 7: Pull the protective paper away from the Sigan 2. Cut the protective paper leaving a 10 cm...

<p>Step 8: The floor covering can immediately be installed onto the Sigan 2 and rolled over the surface.</p>

Step 8: The floor covering can immediately be installed onto the Sigan 2 and rolled over the...

<p>Step 9:Then fold back the second half of the floor covering. Pull the protective paper away from the Sigan 2 with help from the flap created. Slide and roll the floor covering onto the Sigan 2. Then roll over the surface to complete the installation.</p>

Step 9:Then fold back the second half of the floor covering. Pull the protective paper away from...

<p>Step 10: The floor covering can be walked on and used immediately after installing. With Sigan 2, the floor covering can be removed years later without leaving residues.</p>

Step 10: The floor covering can be walked on and used immediately after installing. With Sigan 2,...