RENOPLAN SYSTEM 18

How to securely install wood flooring in domestic bathrooms?

With codex Hydrostop and UZIN MK 92 S.

In addition to large format tiles, wood flooring in the bathroom is a top trend when designing high quality wet rooms or areas. Protecting the substrate and the screed construction against ingress of moisture is the most important factor for being able to maintain the appearance of the wooden surface in the long term. Thanks to the codex sealing sheet, you will obtain the desired sealing and protection for the structure against damages caused by ingress of water from above. In addition, the underlay provides stress-relief for the substrate. The wood flooring and the sealing sheet are bonded safely and solvent-free using the proven 2-component PUR wood flooring adhesive UZIN MK 92 S.

<p>Step 1: Apply a thin layer of the 1-component PUR rapid primer UZIN PE 414 Turbo on the prepared substrate using the UZIN nylon fibre roller and leave to dry.</p>

Step 1: Apply a thin layer of the 1-component PUR rapid primer UZIN PE 414 Turbo on the prepared...

<p>Step 2: Follow the completion of the subfloor preparation work by laying out codex Hydrostop with the printed side facing up, cutting it to size and folding it back.</p>

Step 2: Follow the completion of the subfloor preparation work by laying out codex Hydrostop with...

<p>Step 3: Mix the resin and hardener components of UZIN MK 92 S with a drill and spiral stirrer in the bucket until there are no streaks.</p>

Step 3: Mix the resin and hardener components of UZIN MK 92 S with a drill and spiral stirrer in...

<p>Step 4: Apply the mixed UZIN MK 92 S with a B1/B2 notch sized trowel. Do not apply more adhesive to the substrate than can be laid within the working time to ensure a good adhesion to the back of codex Hydrostop.</p>

Step 4: Apply the mixed UZIN MK 92 S with a B1/B2 notch sized trowel. Do not apply more adhesive to...

<p>Step 5: Install each sheet of codex Hydrostop into the fresh adhesive bed and rub in over the whole surface using the UZIN rubbing cork, To avoid any air from being trapped start from the centre. Place subsequent sheets with at least 5 cm overlap (up to the marking line). It is important that the overlap area is also applied with adhesive.</p>

Step 5: Install each sheet of codex Hydrostop into the fresh adhesive bed and rub in over the whole...

<p>Step 6: Then apply UZIN MK 92 S a B1/B2 notch sized trowel to any edges, e.g., on the bathtub, and bond the codex sealing corners (outer and inner)
on the already installed codex Hydrostop.</p>

Step 6: Then apply UZIN MK 92 S a B1/B2 notch sized trowel to any edges, e.g., on the bathtub, and...

<p>Step 7: Seal the remaining edges with the self-adhesive codex sealing tape BST 75. The wood flooring can then be installed after 24 hours.</p>

Step 7: Seal the remaining edges with the self-adhesive codex sealing tape BST 75. The wood...

<p>Step 8: Mix UZIN MK 92 S and apply along a reference line with the UZIN floorboard notching or B11 notch sized trowel.</p>

Step 8: Mix UZIN MK 92 S and apply along a reference line with the UZIN floorboard notching or B11...

<p>Step 9: Place the wood flooring into the adhesive bed with a slight sliding motion and press down. Remove adhesive residues UZIN Clean-Box cleaning wipes.</p>

Step 9: Place the wood flooring into the adhesive bed with a slight sliding motion and press down....